How to Apply Vinyl Lettering

To apply vinyl to a vehicle, 
thoroughly clean the surface, use masking tape to position the decal (the "hinge" method), then peel back half the backing, spray the area with soapy water (wet method) or apply dry (dry method), squeegee from the center out to remove bubbles, and slowly peel the transfer tape at an angle, reapplying heat with a hairdryer if needed for curves. 

Materials Needed
• Vinyl decal/wrap
• Isopropyl alcohol or mild soap & water solution in a spray bottle
• Lint-free cloths
• Masking tape
• Squeegee (felt-edge recommended for wraps)
• X-Acto knife (for wraps)
• Heat gun or hairdryer (for wraps/curves)